Eccentric Screw Pump

Type EP-14-600

Pump Unit with Variable Delivery Rate and Radio Remote Control

Pumping medium: Solids-bearing liquids (such as cement slurry)
Density of pumping medium: Approx. 1.8 kg/dm³
Solids particle size: Up to 2 mm
Suction head: Flooded suction
Delivery rate: Qmin: 200 liters per minute up to 14 bar
Qnenn: 600 liters per minute up to 14 bar (52 Hz)

1. 1 Structural Steel Base Frame complete with:
• Fork lift pockets
• Central lifting eye
2. 1 Eccentric Screw Pump complete with:
• Bearing block and pump casing , Rotor and Stator
• Shaft sealing – with grease chamber ring PTFE and lubricator
• Joints with double sided boot 1.4021, unseparated
• incl. Trockenlaufschutzeinrichtung und Überdruckschutz
3. 1 Helical Geared Motor complete with:
• Thermistor detector
• Shaft coupling
4. Electrical Control complete with:
• Main and EMERGENCY STOP switch
• ON / OFF operator pushbutton
• Selector switch for ON SITE control / Remote control
• Potentiometer and frequency converter for speed control
• Malfunction indication
• Radio remote control for pump ON/OFF, speed control, malfunction indication
• Plug-in connector socket for connection of a cable remote control

HOSE PUMP

Type HP-50

Areas of Application

The ideal pump for removing and/or delivering solids-
bearing, abrasive and highly viscous liquids:
– Waste water
– Drilling fluids
– Slurries, suspensions
– Sludges

Advantages

– Self-priming
– No valves
– Large solids opening
– Dry-running protection
– Can be used in slurp mode
– High cost-effectiveness
– Versatile
– Low wear costs

MAX FLOW RATE: 6-30 m³/h

MAX DISCHARGE PRESSURE: 8 bar

MAX SUCTION LIFT: 8 m

POWER INPUT: 18,5 kW

MAX GRAIN SIZE: 24 mm

LENGTH: 1,395 mm

WIDTH: 1,650 mm

HEIGHT: 1,515 mm

WEIGHT: 950 kg