Technical Data: | |
---|---|
Maximum Length | 6,300 mm |
Maximum Width without Magazine | 1,100 mm |
Maximum Height | 2,550 mm |
Weight without Attachment | 3,800 kg |
Transport Dimensions with Transport Frame: | |
Length | 6,420 mm |
Width without Rod Changer | 1,500 mm |
Height | 2,650 mm |
Rod Length Information: | |
Maximum Rod Length with Single Drive | 3,000 mm |
Maximum Rod Length with Double Head Drilling Unit | 2,0000 mm |
Cylinder Information: | |
Slewing Range Inclince Cylinder | +/- 20 Degrees |
Cylinder Feed Force | 35 kN |
Cylinder Retraction Force | 70 kN |
Required Oil Pressure | 23 MPa |
Standard Equipment: | |
Options: | |
Key Specifications: | |
---|---|
Hole Diameter | 76-127 mm (3 - 5 in) |
Drill Steel | 45, 51 mm (1 3/4 in, 2 in) |
Weight | 14,900 kg (32,848 lbs) |
Dimensions: | |
Width | 2.5 m (8 ft) |
Height | 7.2/10.7 m (24/33 ft) |
Length | 3.6/3.2 m (12/11 ft) |
Major Components: | |
Rock Drill | HL 810 T, 21 kW (28.2 hp) |
On-Board Compressor | 9.6 cu. m/min/4-10 bar (339 cfm/min/58-145 psi) |
Dust Collector | 23 cu. m/min at 1000 mm vacuum H20 (812 cfm/min at 39 in vacuum H2O) |
Engine | Cat C7 168 kW (225 hp)/ 2200 rpm, CAT C7.1 TIER4 186 kW (249 hp)/ 1800 rpm |
Models | |
DX500 | 51 – 89mm (2” – 3.5”) |
DX700 | 76 – 115mm (3” – 4.5”) |
DX800 | 76 – 127mm (3” – 5”) |
RANGER DX800 | 51 – 127mm (2” – 5”) *new series |
Key Specifications: | |
---|---|
Hole Range | 89-152 mm (3 1/2 - 6 in) |
Drill Steel | 51, 60 mm MF rods (2 in, 2 3/8 in) |
Weight | 21 800 kg (48 061 lbs) |
Dimensions: | |
Width | 2.5 m (8.2 ft) |
Height | 3.2 m (10.6 ft) |
Length | 11.5 m (37.7 ft) |
Major Components: | |
Rock Drill | HL1560T 33 kW (44.3 hp) |
On-Board Compressor | 14 cu.m/min/up to 10 bar (494 cfm/min/145 PSI) |
Dust Collector | 35 cu.m/min at 1200 mm vacuum H2O (1236 cfm/min at 47 in vacuum H2O) |
Engine | Caterpillar C11 ACERT 261 kW (350 hp)/1 800 rpm, Caterpillar C13 TIER4 287 kW (385 hp)/1 800 rpm |
Production Capacity | 2.0 Mt/year |
Models | |
DP1100i | 89 – 140mm (3.5” – 5.5”) |
DP1500i | 89 – 152mm (3.5” – 6”) |
Key Specifications: | |
---|---|
Hole Diameter | 64-102 mm (2 1/2-4 in) |
Drill Steel | 38, 45, 51 mm (1 1/2, 1 3/4, 2 in) |
Weight | 12,700 kg (28,000 lbs) |
Dimensions: | |
Width | 2.5 m (8.2 ft) |
Height | 2.9 m (9.5 ft) |
Length | 9.2 m (30.2 ft) |
Major Components: | |
Rock Drill | HL 710, 17,5 kW (23.5 hp) |
On-Board Compressor | 8.1 cu. m/min/4-10 bar (280 cfm/min/58-145 psi) |
Dust Collector | 17 cu. m/min at 1000 mm H2O (600 cfm min at 39 vacuum H2O) |
Engine | Cat C7 168 kW (225 hp)/ 2100 rpm, Volvo TAD 762VE TIER4 160 kW (214 hp)/ 1800 rpm |
Key Specifications: | |
---|---|
Hole Diameter | 22-45 mm (7/8-1 3/4 in) |
Drill Steel | Integral 19, 22 or 25 mm (3/4, 7/8, 1 in) |
Weight: | |
DC120 | 2,710 kg (6,580 lbs) |
DC121R | 2,800 kg (6,800 lbs) |
DC125R | 3,150 kg (6,940 lbs) |
Dimensions: | |
Width | 1.8 m (5.91 ft) / 1.85 m (6.07 ft) |
Height | 2.2 m (7.22 ft) / 2.45 m (8.04 ft) |
Total Length | 4.6 m (15.1 ft) / 4.7 m (15.42 ft) |
Major Components: | |
Rock Drill | HEX 1, 5.5 kW (7.4 hp) |
On-Board Compressor | 1.2 cu. m/min/4-8 bar 42 cfm/ 58-116 psi |
Dust Collector | 5 cu.m/min at 855 mm 177 cfm/min at 33.7 in vacuum H2O |
Engine | Cat C 2.2 37 kW (50 hp)/ 2800 rpm |
Control System: | |
DC120 | Direct hydraulic for drilling and tramming |
DC125R | Radio remote for drilling and tramming |
Models | |
DC125R | 22-45mm (7/8” – 1.7/5”) |
Technical Data: | |
---|---|
Maximum Length | 6,300 mm |
Maximum Width without Magazine | 1,100 mm |
Maximum Height | 2,550 mm |
Weight without Attachment | 3,800 kg |
Transport Dimensions with Transport Frame: | |
Length | 6,420 mm |
Width without Rod Changer | 1,500 mm |
Height | 2,650 mm |
Rod Length Information: | |
Maximum Rod Length with Single Drive | 3,000 mm |
Maximum Rod Length with Double Head Drilling Unit | 2,0000 mm |
Cylinder Information: | |
Slewing Range Inclince Cylinder | +/- 20 Degrees |
Cylinder Feed Force | 35 kN |
Cylinder Retraction Force | 70 kN |
Required Oil Pressure | 23 MPa |
Standard Equipment: | |
Options: | |
KBM 130: | |
---|---|
Number of Rods | 7 |
Maximum Diameter of Inner Rods | 88.9 mm |
Maximum Diameter of Outer Castings | 133.0 mm |
Maximum Rod Length (Double Head) | 3,000 mm |
KBM 150: | |
Number of Rods | 7 |
Maximum Diameter of Inner Rods | 101.6 mm |
Maximum Diameter of Outer Castings | 152.4 mm |
Maximum Rod Length (Double Head) | 3,000 mm |
KBM 180: | |
Number of Rods | 6 |
Maximum Diameter of Inner Rods | 114.3 mm |
Maximum Diameter of Outer Castings | 177.8 mm |
Maximum Rod Length (Double Head) | 3,000 mm |
KBM 220: | |
Number of Rods | 5 |
Maximum Diameter of Inner Rods | 133.0 mm |
Maximum Diameter of Outer Castings | 219.1 mm |
Maximum Rod Length (Double Head) | 3,000 mm |
Technical Data: | |
---|---|
Diesel Engine | QSB6.7-C200 |
Engine Output | 149 kW |
Diesel Tank Capacity | 350 Litres |
Hydraulic Flow Rate | 2 x 200 / 1 x 150 Litres/Min |
Working Pressure | 32 / 22 MPa |
Hydraulic Tank Capacity | 600 Litres |
Dimensions, Weights & Forces: | |
Weight (w/out Drill Head & Magazine) | 16,000 kg |
Ground Clearance | 350 mm |
Pendulum Range of Crawlers | +15/-15 Grad |
Track Shoes Width | 450 mm |
Travelling Speed | 2.5 km/h |
Traction Force | 135 kN |
Drill Mast Length (Optional) | 7,900 mm |
Usable Length with Single Head (Optional) | 5,600 mm |
Usable Length with Double Head System (Optional) | 4,400 mm |
Feed Force | 115 kN |
Retraction Force | 115 kN |
Feed Speed | 0-15 m/min |
Retraction Speed | 0-15 m/min |
Rapid Feed Speed | 0-60 m/min |
Rapid Retraction Speed | 0-60 m/min |
Clamping & Breaking Device | 250 mm diameter maximum |
Attachments: | |
Hydraulic Drifter | BE 1100, BE 1400, BE 2400 |
Rotary Heads | DE 1400, DE 2000 |
Double Head Drilling Units | DKE 2011, DKE 2011B |
Additional Equipment: | |
Rod Changer Arc Type | KBM 130, KBM 150 |
Auxiliary Winch (Standard) | 20 kN |
Slewable & Telescopic Winch | N/A |
Laterally Displacable Carriage | Yes |
Cable & Radio Remote Control | Yes |
Clamping & Breaking Device up to Maximum | 350 mm diameter maximum |
Mast Extension for Jet Grouting | Yes |
Handling Crane | Yes |
Flush Pump | Yes |
Technical Data: | |
---|---|
Diesel Engine | QSB6.7-C160 |
Engine Output | 119 kW |
Diesel Tank Capacity | 350 Litres |
Hydraulic Flow Rate | 2 x 200 Litres/Min |
Working Pressure | 32 MPa |
Hydraulic Tank Capacity | 415 Litres |
Dimensions, Weights & Forces: | |
Weight (w/out Drill Head & Magazine) | 13,000 kg |
Ground Clearance | 370 mm |
Pendulum Range of Crawlers | +15/-13 Grad |
Track Shoes Width | 400mm |
Travelling Speed | 2.5 km/h |
Traction Force | 120 kN |
Drill Mast Length (Optional) | 7,200 mm |
Usable Length with Single Head (Optional) | 4,300 mm |
Usable Length with Double Head System (Optional) | N/A |
Feed Force | 80 kN |
Retraction Force | 80 kN |
Feed Speed | 0-15 m/min |
Retraction Speed | 0-15 m/min |
Rapid Feed Speed | 0-60 m/min |
Rapid Retraction Speed | 0-60 m/min |
Clamping & Breaking Device | 250 mm diameter maximum |
Attachments: | |
Hydraulic Drifter | BE 1100, BE 1400 |
Rotary Heads | DE 1400, DE 2000 |
Double Head Drilling Units | N/A |
Additional Equipment: | |
Rod Changer Arc Type | KBM 130 |
Auxiliary Winch (Standard) | 20 kN |
Slewable & Telescopic Winch | N/A |
Laterally Displacable Carriage | Yes |
Cable & Radio Remote Control | Yes |
Clamping & Breaking Device up to Maximum | N/A |
Mast Extension for Jet Grouting | N/A |
Handling Crane | N/A |
Flush Pump | N/A |
Drifter: | |
---|---|
Model | Sandvik HL300 (Other Options Available) |
Percussion | 8 kW / 10.73 hp |
Weight | 94 kg / 207 lbs |
Hole Range | 35 - 64 mm / 1-3/8" - 2.5" |
Max Hole Depth | 15 m / 50' |
Attachment & Feed Assembly: | |
Feed Beam | High-Tensile Steel |
Drill Guides | Adjustable & Replaceable Bronze |
Drill Travel | Heavy Duty Chain & Hydraulic Drive Motor |
Steel Length | 3,700 mm / 12' Maximum Length |
Hose Control | Drifter Mounted Hanger, Travels with Drifter |
Centralizer | Hydraulic with Replaceable Hardened Bushings |
Feed Swing | 40º by Hydraulic Cylinder |
Feed Dump | 180º Carrier Bucket Cylinder |
Mounting | Quick Attach Bucket Mount on Boom Stick |
Storage | Built-In Stand |
Weight | 816 kg / 1,800 lbs |
Controls & Hydraulics: | |
Control Systems | Electronic, Metering & Adjustable |
Control Mounting | Portable, HBC Radiomatic Eco |
Hydraulic Valves | Bosch Rexroth, Fully Proportional |
Valve Mounting | Protective Steel Housing on Attachment |
Hydraulic Supply | Excavator's Attachment or Diverter Valve |
Hydraulic Power | 90 LPM @ 150 BAR Required Hydraulic Flow |
Electric Power | 12 Volt System - 24 Volt on Request |
Connection | Single 5 Wire Calbe & Amphenol Connectors |
Options: | |
Air Compressor | Compact, On-Board |
Dust Collection | Ilmeg - Hydraulic Driven, Built-In Mounting |
Stabilizer | Steel, Fixed or Retractable with Replaceable Bucket Tooth |
Drifter | Optional Drifter Available, Please Contact Us for Details |
Customization | Available Upon Request. Please See Below |
Installation & Custom Design: | |
Installation is available by our certified technicians at Traxxon's plant or your location. Ask us about custom-built rock drill attachments for smaller excavators. backhoes and skid steers. Traxxon Rock Drills has the expertise to manufacture attachments, positioners, booms and complete drill rigs for your specialized requirements. |